English
新闻公告
More
化学进展 2010, Vol. 22 Issue (06): 1152-1160 前一篇   后一篇

• 综述与评论 •

桥联型有机-杂化介孔材料(PMOs)

吕志卿1; 吴连斌1, 2**; 蒋剑雄1**; 陈遒1   

  1. (1. 杭州师范大学有机硅化学及材料技术教育部重点实验室 杭州310012; 2. 浙江大学高分子科学与工程学系 杭州 310027)
  • 收稿日期:2009-08-17 修回日期:2009-09-18 出版日期:2010-06-24 发布日期:2010-05-05
  • 通讯作者: 吴连斌 E-mail:lbingo@163.com
  • 基金资助:

    浙江省科技计划项目

The Research of Periodic Mesoporous Organosilicas (PMOs)

Lv Zhingqing1; Wu Lianbin1, 2**; Jiang Jianxiong1**; Chen Qiu1   

  1. (1 Key Laboratory of Organosilicon Chemistry and Material Technology of Education Ministry, Hangzhou Normal University, Hangzhou 310012 ; 2 Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 310027)
  • Received:2009-08-17 Revised:2009-09-18 Online:2010-06-24 Published:2010-05-05

PMOs是以桥联倍半硅氧烷为前驱体,在表面活性剂为结构控制剂的条件下通过溶胶-凝胶法合成的材料,它具有很高的表面积以及规则的孔道和较窄的孔径分布等特点,是一种性能优异的新型功能材料。本文论述了PMOs近年来的发展现状,介绍了PMOs的结构特点,根据结构中桥联有机基团的不同将其分为三类。总结了通过不同的模板合成PMOs的方法,并对影响性能的外部因素进行了探讨。最后提出了几个PMOs研究工作面临的问题,并对PMOs的发展前景作了展望。

Periodic mesoporous organosilicas (PMOs) are prepared using bridged silsesquioxane as the precursor and surfactant as the structure-directing species via sol-gel route. They are novel functional materials with many excellent and special properties, such as high surface area, ordered pore channel, sharp pore size distributions and so on. In this paper, the main advances in the research of PMOs in recent years are reviewed. The structural characteristics are particularly introduced. Then according to the different organic bridging groups incorporated into the structure, the PMOs are classified into three classes. The synthesis of PMOs with different template is introduced and the exterior factor which influenced the property are discussed. At last, the difficulties of research on PMOs are mentioned, and the development prospect is looked forward.

Contents
1 Introduction
2 Features of the structure for PMOs
3 The classification of PMOs
3.1 Alkyl-PMOs
3.2 Aryl-PMOs
3.3 Heterocycle-PMOs
4 The preparation of PMOs
4.1 Using ionic surfactant
4.2 Using non- ionic surfactant
5 Factors influencing on the properties of PMOs
5.1 The influence of inorganic salt
5.2 The influence of organic compound
5.3 The influence of PH value and temperature
6 Application of PMOs
6.1 Thin film and low-dielectric constant PMOs
6.2 Adsorptive material
6.3 Catalyst
6.4 Other new application
7 Conclusion

中图分类号: 

()
[1] 王乐壹, 李牛. 从铜离子、酸中心与铝分布的关系分析不同模板剂制备Cu-SSZ-13的NH3-SCR性能[J]. 化学进展, 2022, 34(8): 1688-1705.
[2] 尹晓庆, 陈玮豪, 邓博苑, 张佳路, 刘婉琪, 彭开铭. 超润湿膜在乳化液破乳中的应用及作用机制[J]. 化学进展, 2022, 34(3): 580-592.
[3] 施剑林, 华子乐. 无机纳米与多孔材料合成中的凝聚态化学[J]. 化学进展, 2020, 32(8): 1060-1075.
[4] 刘宁, 刘水林, 伍素云, 付琳, 吴智, 李来丙. 金属基介孔固体碱催化剂的制备与应用[J]. 化学进展, 2020, 32(5): 536-547.
[5] 杨悦, 王珏玉, 赵敏, 崔岱宗. 病毒模板合成的金属纳米材料及应用[J]. 化学进展, 2019, 31(7): 1007-1019.
[6] 赵剑曦, 顾攀攀, 曾慧, 邓生禄. 表面活性剂在非极性有机溶剂中的自组装[J]. 化学进展, 2019, 31(5): 643-653.
[7] 冯盛, 杨芳, 刘梦瑶, 范红显, 徐念. 抗癌药物多烯紫杉醇载体[J]. 化学进展, 2019, 31(2/3): 368-380.
[8] 林代武, 邢起国, 王跃飞, 齐崴, 苏荣欣, 何志敏. 多肽超分子手性自组装与应用[J]. 化学进展, 2019, 31(12): 1623-1636.
[9] 刘畅, 吴峰, 苏倩倩, 钱卫平. 贵金属多孔纳米结构的模板法制备及生物检测应用[J]. 化学进展, 2019, 31(10): 1396-1405.
[10] 李勃天, 温幸, 唐黎明. 一维聚合物-无机纳米复合材料的制备[J]. 化学进展, 2018, 30(4): 338-348.
[11] 李里, 董健, 钱卫平*. 纳米碗阵列的制备与应用研究[J]. 化学进展, 2018, 30(2/3): 156-165.
[12] 喻志超, 汤淳, 姚丽, 高庆, 徐祖顺, 杨婷婷. 聚合物基模板制备中空介孔材料[J]. 化学进展, 2018, 30(12): 1899-1907.
[13] 汪伟, 谢锐, 巨晓洁, 刘壮, 褚良银*. 液滴模板法制备颗粒材料过程中介尺度结构调控的研究进展[J]. 化学进展, 2018, 30(1): 44-50.
[14] 余响林, 陈小姣, 张碧玉, 饶聪, 何源, 黎俊波. 基于有序介孔材料的荧光探针及其应用[J]. 化学进展, 2016, 28(6): 896-907.
[15] 赵新红, 高向平, 郝志鑫, 张晓晓. 多级孔磷酸铝分子筛的合成、表征及催化应用[J]. 化学进展, 2016, 28(5): 686-696.